U0220
System
Network (CAN Bus)
Scanner required
Full-system scanner (engine, ABS, SRS, transmission, service resets)

Lost Communication with Power Steering Control Module

Understand U0220, common causes, and the right TOPDON scanner to diagnose it.

Power steering control module communication loss — distinct ID from U0131 on some networks.

Common symptoms

  • Heavy steering
  • PS warning lamp

Typical causes

  • EPS module fault
  • CAN wiring to rack
  • Steering fuse

What scanner do you need?

Full-system scanner (engine, ABS, SRS, transmission, service resets)

Use live data and freeze frame to confirm the fault before replacing parts. ABS, SRS, and network U-codes usually require a full-system scanner.

Diagnostic tips

  • Record freeze frame data when the code first sets
  • Clear the code only after fixing the root cause
  • Check for related pending codes that point to a common issue
  • Verify battery voltage is above 12.4V before chasing sensor codes

Recommended TOPDON scanners

Frequently asked questions

Can I diagnose U0220 with a basic code reader?
U0220 may set in the engine module, but related diagnostics often benefit from an enhanced or full-system scanner with live data and freeze frame.
Is it safe to drive with U0220?
It depends on the code and symptoms. Flashing check engine lights and misfire codes should be addressed immediately. Consult a professional if unsure.