U0120
System
Network (CAN Bus)
Scanner required
Full-system scanner (engine, ABS, SRS, transmission, service resets)

Lost Communication with Electric Power Steering (EPAS) Module

Understand U0120, common causes, and the right TOPDON scanner to diagnose it.

Electric power steering module not on the network — steering assist may be lost.

Common symptoms

  • Heavy steering
  • EPS warning
  • Stability control affected

Typical causes

  • Failed EPAS module
  • CAN wiring to steering rack
  • Low battery
  • Blown EPS fuse

What scanner do you need?

Full-system scanner (engine, ABS, SRS, transmission, service resets)

Use live data and freeze frame to confirm the fault before replacing parts. ABS, SRS, and network U-codes usually require a full-system scanner.

Diagnostic tips

  • Record freeze frame data when the code first sets
  • Clear the code only after fixing the root cause
  • Check for related pending codes that point to a common issue
  • Verify battery voltage is above 12.4V before chasing sensor codes

Recommended TOPDON scanners

Frequently asked questions

Can I diagnose U0120 with a basic code reader?
U0120 may set in the engine module, but related diagnostics often benefit from an enhanced or full-system scanner with live data and freeze frame.
Is it safe to drive with U0120?
It depends on the code and symptoms. Flashing check engine lights and misfire codes should be addressed immediately. Consult a professional if unsure.