U0115
System
Network (CAN Bus)
Scanner required
Full-system scanner (engine, ABS, SRS, transmission, service resets)

Lost Communication with ECM/PCM (Alternate ID)

Understand U0115, common causes, and the right TOPDON scanner to diagnose it.

Secondary ECM/PCM communication loss identifier on some OEM networks.

Common symptoms

  • No-start
  • Multiple modules offline

Typical causes

  • Same root causes as U0100
  • Gateway routing fault
  • Dual-PCM architectures

What scanner do you need?

Full-system scanner (engine, ABS, SRS, transmission, service resets)

Use live data and freeze frame to confirm the fault before replacing parts. ABS, SRS, and network U-codes usually require a full-system scanner.

Diagnostic tips

  • Record freeze frame data when the code first sets
  • Clear the code only after fixing the root cause
  • Check for related pending codes that point to a common issue
  • Verify battery voltage is above 12.4V before chasing sensor codes

Recommended TOPDON scanners

Frequently asked questions

Can I diagnose U0115 with a basic code reader?
U0115 may set in the engine module, but related diagnostics often benefit from an enhanced or full-system scanner with live data and freeze frame.
Is it safe to drive with U0115?
It depends on the code and symptoms. Flashing check engine lights and misfire codes should be addressed immediately. Consult a professional if unsure.