P2495
System
Powertrain (Diesel Emissions)
Scanner required
Full-system scanner (engine, ABS, SRS, transmission, service resets)

Diesel Particulate Filter Differential Pressure Too High

Understand P2495, common causes, and the right TOPDON scanner to diagnose it.

DPF differential pressure above threshold — restriction from soot or ash.

Common symptoms

  • Limp mode
  • DPF warning
  • P2463/P2464 cluster

Typical causes

  • Clogged DPF
  • Failed regen
  • Excessive soot from engine fault
  • Ash accumulation

What scanner do you need?

Full-system scanner (engine, ABS, SRS, transmission, service resets)

Use live data and freeze frame to confirm the fault before replacing parts. ABS, SRS, and network U-codes usually require a full-system scanner.

Diagnostic tips

  • Record freeze frame data when the code first sets
  • Clear the code only after fixing the root cause
  • Check for related pending codes that point to a common issue
  • Verify battery voltage is above 12.4V before chasing sensor codes

Recommended TOPDON scanners

Frequently asked questions

Can I diagnose P2495 with a basic code reader?
P2495 may set in the engine module, but related diagnostics often benefit from an enhanced or full-system scanner with live data and freeze frame.
Is it safe to drive with P2495?
It depends on the code and symptoms. Flashing check engine lights and misfire codes should be addressed immediately. Consult a professional if unsure.