P2210
System
Powertrain (Diesel Emissions)
Scanner required
Full-system scanner (engine, ABS, SRS, transmission, service resets)

NOx Sensor Positive Current Control Circuit Low (Bank 1 Sensor 1)

Understand P2210, common causes, and the right TOPDON scanner to diagnose it.

NOx sensor positive current control low.

Common symptoms

  • Derate
  • Check engine light

Typical causes

  • Short in NOx sensor circuit
  • Failed sensor
  • Module driver fault

What scanner do you need?

Full-system scanner (engine, ABS, SRS, transmission, service resets)

Use live data and freeze frame to confirm the fault before replacing parts. ABS, SRS, and network U-codes usually require a full-system scanner.

Diagnostic tips

  • Record freeze frame data when the code first sets
  • Clear the code only after fixing the root cause
  • Check for related pending codes that point to a common issue
  • Verify battery voltage is above 12.4V before chasing sensor codes

Recommended TOPDON scanners

Frequently asked questions

Can I diagnose P2210 with a basic code reader?
P2210 may set in the engine module, but related diagnostics often benefit from an enhanced or full-system scanner with live data and freeze frame.
Is it safe to drive with P2210?
It depends on the code and symptoms. Flashing check engine lights and misfire codes should be addressed immediately. Consult a professional if unsure.