P2122
System
Powertrain (Throttle)
Scanner required
Enhanced OBD2 scanner (live data graphs, freeze frame, battery voltage test)

Throttle/Pedal Position Sensor D Circuit Low Input

Understand P2122, common causes, and the right TOPDON scanner to diagnose it.

Accelerator pedal position sensor D circuit low — redundant pedal sensor on drive-by-wire.

Common symptoms

  • No acceleration
  • Limp mode
  • Pedal dead zone

Typical causes

  • Failed pedal assembly
  • Wiring harness under dash
  • Connector corrosion

What scanner do you need?

Enhanced OBD2 scanner (live data graphs, freeze frame, battery voltage test)

Use live data and freeze frame to confirm the fault before replacing parts. ABS, SRS, and network U-codes usually require a full-system scanner.

Diagnostic tips

  • Record freeze frame data when the code first sets
  • Clear the code only after fixing the root cause
  • Check for related pending codes that point to a common issue
  • Verify battery voltage is above 12.4V before chasing sensor codes

Recommended TOPDON scanners

Frequently asked questions

Can I diagnose P2122 with a basic code reader?
P2122 may set in the engine module, but related diagnostics often benefit from an enhanced or full-system scanner with live data and freeze frame.
Is it safe to drive with P2122?
It depends on the code and symptoms. Flashing check engine lights and misfire codes should be addressed immediately. Consult a professional if unsure.