P2032
System
Powertrain (Diesel Emissions)
Scanner required
Full-system scanner (engine, ABS, SRS, transmission, service resets)

Exhaust Gas Temperature Sensor Circuit (Bank 1 Sensor 2)

Understand P2032, common causes, and the right TOPDON scanner to diagnose it.

EGT sensor 2 circuit fault — monitors DPF inlet/outlet temperature during regen.

Common symptoms

  • Regen failures
  • Check engine light
  • P2463 may follow

Typical causes

  • Failed EGT probe
  • Wiring near turbo/DPF
  • Sensor tip cracked

What scanner do you need?

Full-system scanner (engine, ABS, SRS, transmission, service resets)

Use live data and freeze frame to confirm the fault before replacing parts. ABS, SRS, and network U-codes usually require a full-system scanner.

Diagnostic tips

  • Record freeze frame data when the code first sets
  • Clear the code only after fixing the root cause
  • Check for related pending codes that point to a common issue
  • Verify battery voltage is above 12.4V before chasing sensor codes

Recommended TOPDON scanners

Frequently asked questions

Can I diagnose P2032 with a basic code reader?
P2032 may set in the engine module, but related diagnostics often benefit from an enhanced or full-system scanner with live data and freeze frame.
Is it safe to drive with P2032?
It depends on the code and symptoms. Flashing check engine lights and misfire codes should be addressed immediately. Consult a professional if unsure.