Shift solenoid C circuit open or short — controls gear apply/release in the valve body.
Common symptoms
- Harsh or missed shifts
- Trans limp mode
- Slipping between gears
- Check engine light
Typical causes
- Failed shift solenoid
- Dirty or burnt ATF clogging solenoid
- Valve body wear or debris
- Wiring at transmission connector
- TCM driver circuit fault
What scanner do you need?
Full-system scanner (engine, ABS, SRS, transmission, service resets)
Use live data and freeze frame to confirm the fault before replacing parts. ABS, SRS, and network U-codes usually require a full-system scanner.
Diagnostic tips
- Record freeze frame data when the code first sets
- Clear the code only after fixing the root cause
- Check for related pending codes that point to a common issue
- Verify battery voltage is above 12.4V before chasing sensor codes