P0350
System
Powertrain (Ignition)
Scanner required
Basic OBD2 code reader (engine codes, live data, smog readiness)

Ignition Coil Primary/Secondary Circuit Malfunction

Understand P0350, common causes, and the right TOPDON scanner to diagnose it.

General ignition coil circuit fault — may pair with specific P035x cylinder codes.

Common symptoms

  • Misfire
  • Rough idle
  • Check engine light

Typical causes

  • Failed coil pack
  • Moisture in coil wells
  • Primary circuit open
  • Bad spark plug breaking down

What scanner do you need?

Basic OBD2 code reader (engine codes, live data, smog readiness)

Use live data and freeze frame to confirm the fault before replacing parts. ABS, SRS, and network U-codes usually require a full-system scanner.

Diagnostic tips

  • Record freeze frame data when the code first sets
  • Clear the code only after fixing the root cause
  • Check for related pending codes that point to a common issue
  • Verify battery voltage is above 12.4V before chasing sensor codes

Recommended TOPDON scanners

Frequently asked questions

Can I diagnose P0350 with a basic code reader?
Yes — P0350 is typically accessible with a basic OBD2 code reader like the TOPDON ArtiDiag201 or TopScan Lite. Live data helps confirm the repair.
Is it safe to drive with P0350?
It depends on the code and symptoms. Flashing check engine lights and misfire codes should be addressed immediately. Consult a professional if unsure.