P0340
System
Powertrain (Engine)
Scanner required
Enhanced OBD2 scanner (live data graphs, freeze frame, battery voltage test)

Camshaft Position Sensor Circuit (Bank 1)

Understand P0340, common causes, and the right TOPDON scanner to diagnose it.

Camshaft position sensor signal missing or invalid. Used for fuel injection and ignition timing on most engines.

Common symptoms

  • No-start
  • Hard starting
  • Rough running
  • May appear with timing-related codes

Typical causes

  • Failed cam sensor
  • Timing chain stretch (advanced engines)
  • Wiring fault
  • Oil contamination on sensor

What scanner do you need?

Enhanced OBD2 scanner (live data graphs, freeze frame, battery voltage test)

Use live data and freeze frame to confirm the fault before replacing parts. ABS, SRS, and network U-codes usually require a full-system scanner.

Diagnostic tips

  • Record freeze frame data when the code first sets
  • Clear the code only after fixing the root cause
  • Check for related pending codes that point to a common issue
  • Verify battery voltage is above 12.4V before chasing sensor codes

Recommended TOPDON scanners

Frequently asked questions

Can I diagnose P0340 with a basic code reader?
P0340 may set in the engine module, but related diagnostics often benefit from an enhanced or full-system scanner with live data and freeze frame.
Is it safe to drive with P0340?
It depends on the code and symptoms. Flashing check engine lights and misfire codes should be addressed immediately. Consult a professional if unsure.