P0325
System
Powertrain (Engine)
Scanner required
Enhanced OBD2 scanner (live data graphs, freeze frame, battery voltage test)

Knock Sensor 1 Circuit Malfunction

Understand P0325, common causes, and the right TOPDON scanner to diagnose it.

Knock sensor signal missing or out of range — ECU may retard timing and reduce performance.

Common symptoms

  • Reduced power
  • Ping under load if sensor ignored
  • Check engine light

Typical causes

  • Failed knock sensor
  • Wiring damage
  • Sensor not torqued correctly
  • ECU input fault

What scanner do you need?

Enhanced OBD2 scanner (live data graphs, freeze frame, battery voltage test)

Use live data and freeze frame to confirm the fault before replacing parts. ABS, SRS, and network U-codes usually require a full-system scanner.

Diagnostic tips

  • Record freeze frame data when the code first sets
  • Clear the code only after fixing the root cause
  • Check for related pending codes that point to a common issue
  • Verify battery voltage is above 12.4V before chasing sensor codes

Recommended TOPDON scanners

Frequently asked questions

Can I diagnose P0325 with a basic code reader?
P0325 may set in the engine module, but related diagnostics often benefit from an enhanced or full-system scanner with live data and freeze frame.
Is it safe to drive with P0325?
It depends on the code and symptoms. Flashing check engine lights and misfire codes should be addressed immediately. Consult a professional if unsure.