P0299
System
Powertrain (Forced Induction)
Scanner required
Enhanced OBD2 scanner (live data graphs, freeze frame, battery voltage test)

Turbocharger/Supercharger Underboost Condition

Understand P0299, common causes, and the right TOPDON scanner to diagnose it.

Boost below target — boost leak, failed turbo, or clogged intercooler on turbocharged engines.

Common symptoms

  • Loss of power
  • Whistling or chuffing noise
  • Black or gray smoke

Typical causes

  • Boost hose leak or disconnect
  • Failed turbocharger
  • Clogged intercooler
  • Wastegate stuck open

What scanner do you need?

Enhanced OBD2 scanner (live data graphs, freeze frame, battery voltage test)

Use live data and freeze frame to confirm the fault before replacing parts. ABS, SRS, and network U-codes usually require a full-system scanner.

Diagnostic tips

  • Record freeze frame data when the code first sets
  • Clear the code only after fixing the root cause
  • Check for related pending codes that point to a common issue
  • Verify battery voltage is above 12.4V before chasing sensor codes

Recommended TOPDON scanners

Frequently asked questions

Can I diagnose P0299 with a basic code reader?
P0299 may set in the engine module, but related diagnostics often benefit from an enhanced or full-system scanner with live data and freeze frame.
Is it safe to drive with P0299?
It depends on the code and symptoms. Flashing check engine lights and misfire codes should be addressed immediately. Consult a professional if unsure.