P0140
System
Powertrain (Emissions)
Scanner required
Enhanced OBD2 scanner (live data graphs, freeze frame, battery voltage test)

O2 Sensor No Activity Detected (Bank 1 Sensor 2)

Understand P0140, common causes, and the right TOPDON scanner to diagnose it.

Oxygen sensor bank 1 sensor 2 (downstream (post-cat)) shows no switching activity. Affects fuel trim and catalyst monitoring.

Common symptoms

  • Check engine light
  • Poor fuel economy
  • Failed emissions test
  • May set with P0420/P0430 on downstream sensors

Typical causes

  • Failed oxygen sensor
  • O2 sensor heater circuit fault
  • Exhaust leak near sensor
  • Wiring or connector corrosion
  • Contaminated or failed catalytic converter mimicking sensor fault

What scanner do you need?

Enhanced OBD2 scanner (live data graphs, freeze frame, battery voltage test)

Use live data and freeze frame to confirm the fault before replacing parts. ABS, SRS, and network U-codes usually require a full-system scanner.

Diagnostic tips

  • Record freeze frame data when the code first sets
  • Clear the code only after fixing the root cause
  • Check for related pending codes that point to a common issue
  • Verify battery voltage is above 12.4V before chasing sensor codes

Recommended TOPDON scanners

Frequently asked questions

Can I diagnose P0140 with a basic code reader?
P0140 may set in the engine module, but related diagnostics often benefit from an enhanced or full-system scanner with live data and freeze frame.
Is it safe to drive with P0140?
It depends on the code and symptoms. Flashing check engine lights and misfire codes should be addressed immediately. Consult a professional if unsure.