P0014
System
Powertrain (Engine/VVT)
Scanner required
Enhanced OBD2 scanner (live data graphs, freeze frame, battery voltage test)

Exhaust Camshaft Position Timing Over-Advanced (Bank 1)

Understand P0014, common causes, and the right TOPDON scanner to diagnose it.

Exhaust cam VVT over-advanced. Similar root causes to P0011 — oil supply and solenoid health are first checks.

Common symptoms

  • Engine rattle
  • Rough idle
  • Poor fuel economy

Typical causes

  • VVT solenoid failure
  • Low oil pressure
  • Timing chain wear
  • Dirty engine oil

What scanner do you need?

Enhanced OBD2 scanner (live data graphs, freeze frame, battery voltage test)

Use live data and freeze frame to confirm the fault before replacing parts. ABS, SRS, and network U-codes usually require a full-system scanner.

Diagnostic tips

  • Record freeze frame data when the code first sets
  • Clear the code only after fixing the root cause
  • Check for related pending codes that point to a common issue
  • Verify battery voltage is above 12.4V before chasing sensor codes

Recommended TOPDON scanners

Frequently asked questions

Can I diagnose P0014 with a basic code reader?
P0014 may set in the engine module, but related diagnostics often benefit from an enhanced or full-system scanner with live data and freeze frame.
Is it safe to drive with P0014?
It depends on the code and symptoms. Flashing check engine lights and misfire codes should be addressed immediately. Consult a professional if unsure.