C0563
System
Chassis (ABS / Stability)
Scanner required
Full-system scanner (engine, ABS, SRS, transmission, service resets)

Traction Control System Disabled

Understand C0563, common causes, and the right TOPDON scanner to diagnose it.

TCS/ESC disabled due to fault or driver switch — stability intervention unavailable.

Common symptoms

  • TCS/ESC warning
  • Wheel spin in rain or snow

Typical causes

  • Wheel speed sensor fault
  • Steering angle sensor uncalibrated
  • Driver disabled TCS button stuck

What scanner do you need?

Full-system scanner (engine, ABS, SRS, transmission, service resets)

Use live data and freeze frame to confirm the fault before replacing parts. ABS, SRS, and network U-codes usually require a full-system scanner.

Diagnostic tips

  • Record freeze frame data when the code first sets
  • Clear the code only after fixing the root cause
  • Check for related pending codes that point to a common issue
  • Verify battery voltage is above 12.4V before chasing sensor codes

Recommended TOPDON scanners

Frequently asked questions

Can I diagnose C0563 with a basic code reader?
C0563 may set in the engine module, but related diagnostics often benefit from an enhanced or full-system scanner with live data and freeze frame.
Is it safe to drive with C0563?
It depends on the code and symptoms. Flashing check engine lights and misfire codes should be addressed immediately. Consult a professional if unsure.