C0562
System
Chassis (ABS / Stability)
Scanner required
Full-system scanner (engine, ABS, SRS, transmission, service resets)

ABS Disabled

Understand C0562, common causes, and the right TOPDON scanner to diagnose it.

ABS function intentionally or fault-disabled — often sets with other C-codes as a summary status.

Common symptoms

  • ABS light on
  • Longer stopping distance in panic brake

Typical causes

  • Underlying wheel speed or pump fault
  • Low voltage event
  • Module detected unsafe ABS operation

What scanner do you need?

Full-system scanner (engine, ABS, SRS, transmission, service resets)

Use live data and freeze frame to confirm the fault before replacing parts. ABS, SRS, and network U-codes usually require a full-system scanner.

Diagnostic tips

  • Record freeze frame data when the code first sets
  • Clear the code only after fixing the root cause
  • Check for related pending codes that point to a common issue
  • Verify battery voltage is above 12.4V before chasing sensor codes

Recommended TOPDON scanners

Frequently asked questions

Can I diagnose C0562 with a basic code reader?
C0562 may set in the engine module, but related diagnostics often benefit from an enhanced or full-system scanner with live data and freeze frame.
Is it safe to drive with C0562?
It depends on the code and symptoms. Flashing check engine lights and misfire codes should be addressed immediately. Consult a professional if unsure.