C0110
System
Chassis (ABS / Stability)
Scanner required
Full-system scanner (engine, ABS, SRS, transmission, service resets)

Pump Motor Circuit Malfunction

Understand C0110, common causes, and the right TOPDON scanner to diagnose it.

ABS pump motor circuit fault — the module cannot run the hydraulic pump for ABS pressure.

Common symptoms

  • ABS light on
  • Soft brake pedal on some systems
  • ABS inactive

Typical causes

  • Failed ABS pump motor
  • Pump relay fault
  • Low battery voltage during ABS self-test
  • EBCM internal fault

What scanner do you need?

Full-system scanner (engine, ABS, SRS, transmission, service resets)

Use live data and freeze frame to confirm the fault before replacing parts. ABS, SRS, and network U-codes usually require a full-system scanner.

Diagnostic tips

  • Record freeze frame data when the code first sets
  • Clear the code only after fixing the root cause
  • Check for related pending codes that point to a common issue
  • Verify battery voltage is above 12.4V before chasing sensor codes

Recommended TOPDON scanners

Frequently asked questions

Can I diagnose C0110 with a basic code reader?
C0110 may set in the engine module, but related diagnostics often benefit from an enhanced or full-system scanner with live data and freeze frame.
Is it safe to drive with C0110?
It depends on the code and symptoms. Flashing check engine lights and misfire codes should be addressed immediately. Consult a professional if unsure.