B0030
System
Supplemental Restraint (Airbag)
Scanner required
Full-system scanner (engine, ABS, SRS, transmission, service resets)

Second Row Left Side Airbag Deployment Control

Understand B0030, common causes, and the right TOPDON scanner to diagnose it.

Second row left side airbag circuit fault.

Common symptoms

  • Airbag light on
  • After seat removal without battery disconnect

Typical causes

  • Side airbag module in seat
  • Seat harness damage
  • Connector under seat

What scanner do you need?

Full-system scanner (engine, ABS, SRS, transmission, service resets)

Use live data and freeze frame to confirm the fault before replacing parts. ABS, SRS, and network U-codes usually require a full-system scanner.

Diagnostic tips

  • Record freeze frame data when the code first sets
  • Clear the code only after fixing the root cause
  • Check for related pending codes that point to a common issue
  • Verify battery voltage is above 12.4V before chasing sensor codes

Recommended TOPDON scanners

Frequently asked questions

Can I diagnose B0030 with a basic code reader?
B0030 may set in the engine module, but related diagnostics often benefit from an enhanced or full-system scanner with live data and freeze frame.
Is it safe to drive with B0030?
It depends on the code and symptoms. Flashing check engine lights and misfire codes should be addressed immediately. Consult a professional if unsure.