B0001
System
Supplemental Restraint (Airbag)
Scanner required
Full-system scanner (engine, ABS, SRS, transmission, service resets)

Driver Frontal Stage 1 Deployment Control

Understand B0001, common causes, and the right TOPDON scanner to diagnose it.

Fault in driver airbag first stage deployment circuit — airbag light on, system may not deploy in a crash.

Common symptoms

  • Airbag/SRS light on
  • Horn or cruise inop with clock spring

Typical causes

  • Clock spring failure
  • Driver airbag module fault
  • Wiring under steering wheel
  • Aftermarket steering wheel without resistor

What scanner do you need?

Full-system scanner (engine, ABS, SRS, transmission, service resets)

Use live data and freeze frame to confirm the fault before replacing parts. ABS, SRS, and network U-codes usually require a full-system scanner.

Diagnostic tips

  • Record freeze frame data when the code first sets
  • Clear the code only after fixing the root cause
  • Check for related pending codes that point to a common issue
  • Verify battery voltage is above 12.4V before chasing sensor codes

Recommended TOPDON scanners

Frequently asked questions

Can I diagnose B0001 with a basic code reader?
B0001 may set in the engine module, but related diagnostics often benefit from an enhanced or full-system scanner with live data and freeze frame.
Is it safe to drive with B0001?
It depends on the code and symptoms. Flashing check engine lights and misfire codes should be addressed immediately. Consult a professional if unsure.